Polymer Systems
Technology Limited

Advanced Engineering

Defence:
Commercial Aviation:

R3-2160

Adhesives/Sealants

High Temperature Adhesive/Sealant Silicone Elastomer

DESCRIPTION
  • Two-part, pourable silicone system
  • High tear strength and good physical properties
  • Designed for enhanced performance in extreme low and high temperatures
  • 1:1 Mix Ratio (Part A: Part B)
APPLICATION
  • As a high temperature adhesive/sealant
  • Ideal for use in potting connectors, cable harness breakouts, molded high voltage terminals, seals and gaskets due to its high physical strength
PROPERTIES
Typical PropertiesAverage Result
Uncured:
Appearance, Part ARed
Appearance, Part BDark Brown
Work Time72 hours
Cured: 15 minutes at 150°C (302°F)
Specific Gravity1.18
Durometer, Type A35
Tensile Strength550 psi (3.4 MPa)
Elongation525%
Tear Strength130 ppi (22.9 kN/m)
Post-Cured: 2 hours at 150°C (302°F), stabilized for 1 hour minimum at ambient temperature and humidity
Lap Shear Strength (primed w/SP-270)250 psi (1.7 MPa)

The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

Packaging

50 ml SxS Kit
400 ml SxS Kit
2 Pint Kit (910 g)
2 Gallon Kit (7.28 kg)
10 Gallon Kit (36.4 kg)
2 Drum Kit (360 kg)

Warranty

6 Months

Product Profile - Full Details Product Profile
Material Saftey Data Sheet EU EN Material Saftey Data Sheet

Biomaterials

Medical Silicones
Biomaterials - Medical Silicones for Healthcare

Advanced Technologies

Advanced Technologies Industrial & Engineering Silicones
Space - Aviation Grade Industrial & Engineering Silicones

Tubing

Food Medical Industrial Grade Silicone Tubing
Food, Medical & Industrial Quality Silicone Tubing

Equipment

Silicone Mixing Dispensing Degassing Equipment
Mixing Dispensing & Degassing Equipment for Silicone